Skip to Content
Browse documentation

Create a Reseller SSH Key Pair

Generate an RAPP SSH key pair with Ed25519, RSA or ECDSA, supported sizes, a valid filename and an optional private-key passphrase.

Open SSH → Create SSH Key Pair.

FieldChoices and requirements
Key typeEd25519, RSA or ECDSA. The panel recommends Ed25519 and offers RSA for compatibility.
Key lengthEd25519: fixed automatically. RSA: 3072 or 4096. ECDSA: 256, 384 or 521.
Key nameA valid filename such as id_ed25519, id_rsa or id_ecdsa. No path separators; start with a lowercase letter or digit and do not end with underscore or dot.
Key passphraseOptional protection for the private key. Retain it securely if set.

Changing the key type updates the suggested name and size choices. Review the name before submission so it does not unintentionally target a key used elsewhere.

An existing name replaces the stored pair

Generation replaces the private-key file and its matching public-key filename when that name already exists. Use a new name unless you intend to rotate the pair. Preserve required recovery material and update dependent backup pools and remote authorizations when rotating.

Generate and verify

  1. Choose the type and matching size.
  2. Review the filename and optional passphrase.
  3. Open the confirmation and confirm creation.
  4. Check the result under List SSH Keys.
  5. Install the public key on the intended remote system before attempting outbound authentication.

Demo mode blocks generation. A generated key pair is not automatically authorized on a destination.

For an unattended SSH backup pool, the pool setup expects a key without a password. Use a dedicated key and appropriate remote permissions rather than removing protection from an unrelated personal key.